MBH - Potentiometric linear transducer

The Series MBH is used in applications that need a hermetically sealed sensor element. The sensor technology is based on an encapsulated foil potentiometer.

Special features

  • Hermetically encapsulated sensor element
  • Sealed round cable outlet
  • Saves space by flat construction and by slider coupling
  • Integrated end stops
  • 3 million sliding movements

In the case of linear displacement sensor series MBH, the mechanical detection of the linear movement is carried out by a rail-guided slider, which presses with a defined force on the film potentiometer element. In the film potentiometer, the resistive track and the collector track  are printed on thin films which are opposite one another and are separated by a spacer. A punctiform contact between the resistance foil and the collector foil is produced by slightly compressing the foils. This results in the position-dependent output signal. Since the potentiometric measuring principle can be used without electronic signal calculation, the signal is available without any delay even after switching on and off. Due to the flat design and the absence of the push rod, the MBH can be integrated very space-saving. Customized adaptations with regard to special measuring lengths and cable assemblies are possible on request. There are various applications for the linear potentiometer series MBH with environmental exposure to water and humidity, like filling level meters, adjustment of operation tables or position control of diagnostics or therapy appliances.

Facts Fakta

Effective electrical travel100 mm
Mechanical position detectionGuided cursor
Sensor TechnologyPotentiometric
DesignOpen aluminium rail
Protection ClassIP45
Electrical connectionAxial, Cable
Axel Kullmann

Kontakta vår support så hjälper vi dig! Contact our support for advice!

Vi kan besvara era frågor och berätta hur produkterna kan anpassas efter era precisa behov We can answer your questions and describe how our products can be modified to fit your exact needs

Axel Kullmann

Liknande produkter Related products

CLP13 – Potentiometric Linear Transducer

Displacement sensor in space-saving design for 13 mm to 100 mm stroke

CLP21 – Potentiometric Linear Transducer

In the displacement sensor series CLP21 the mechanical detection of linear movement is done by a front guided push rod with accurate sleeve bearings.

CFL - Potentiometric Linear Transducer

The CFL series is used in XY-applications. Measuring lengths from 100 to 1000 mm.

Alla rättigheter © Lotax AB

Fyll i dina uppgifter och skicka så återkommer vi!

Fill out and send the form below and we will get back to you!

Formuläret innehåller fel. Kontrollera formuläret och försök igen. Tack! The form contains errors! Please check and try again, thanks!
Beskriv ditt ärende
Your message
* Obligatoriskt * Required

Tack för ditt meddelande!

Thanks for contacting us!